Izdelki za stroji za rezanje (164)

Der Plasmabrenner wird zum Schneiden von Stahlblech/Aluminium/Edelstahl mittels der Plasmatechnologie verwendet. Hierfür können wir Ihnen die benötigten Verschleißteile liefern. Der Plasmabrenner PerCut® 210 von Kjellberg® wird zum Schneiden von Stahlblech/Aluminium/Edelstahl verwendet und ist für Leistungen bis 200 Ampere geeignet. Zu diesem Plasmabrenner können wir Ihnen eine große Anzahl der verschiedenen Verschleißteile und auch den kompletten Plasmaschneidkopf liefern.

Right-hand cutting reamer with expanding blades. Due to the unique Hunger relief grinding operation the blades have a progressively increasing clearance angle giving a soft cutting action. Starting with size D 12 the adjusting nut is marked with an annular scale. One graduation of the scale corresponds to a change of the reamer diameter by 0,01 mm. The reamers are available with standard blades made of high quality special steel to ensure superior cutting performance. The reamers are also available with hard chromium coated blades. The hard chromium coating has superior hardness in combination with a low friction coefficient. Thus reamers of the "hard chromium" series are particularly suitable for reaming abrasive materials and materials with a tendency to adhere to and to build-up the cutting edge.

Die Düsen werden zum Schneiden von Stahlblech mittels der Plasmatechnologie verwendet. Die Düsen sind aus Kupfer und werden beim Plasmabrenner PerCut® 210M/211M/450M/451M von Kjellberg® verwendet und sind für Leistungen bis 360 Ampere geeignet.

The laser welding systems of the AL series can be used universally. They might be integrated into existing machine structures or used with an application device for manual welding. In combination with our NC-controlled laser machining table AL-T you get a real professional solution. We offer the required performance class for every application. You can choose between 75 and 900 W. There is a wide range of processing lenses and equipment options for these laser systems. Regardless of whether you use a simple 90 ° deflection lens, the tilt-swivel lens or our circular welding lens - the laser beam always reaches the desired point on the workpiece with pinpoint accuracy. Additional equipment options are optionally available for the AL, such as: • Micro welding device for a welding spot diameter <100 µm • Rotary axis module for cylindrical welds • automatic wire feeder • Workpiece holder • camera system •…and much more

This exceptionally versatile tool for post-mould assemblies is ideally suited to all levels of production: from a single unit for prototype assembly, to multiple units on an assembly line. The SPIROL® Model CM Manual Compression Limiter Installation Machine easily accommodates quick change-overs by simply: • Replacing the fixture • Swapping insertion punch/pusher tip • Adjusting the positive stop for new install height. The use of high quality shafting and bearings results in smooth operation, precise positioning, repeatability, and durability. The Model CM Manual Compression Limiter Installation Machine installs Compression Limiters ranging in diameter from M3 to M10 metric and #4 to 3/8" unified, and has a maximum insertion force of 0.9kN (200 lbs).

This stable work table can be used with laser sources from 300 - 900 W, which are integrated in the work table. The modular design allows the use of various optics and focal lengths, so that you can optimally carry out your tasks. The system can be operated either manually - with our instantly responding joystick - and semi-automatically or automatically with the WINLaserNC software. When welding, workpieces are moved precisely on the three axes of movement of the work table. An axis of rotation is also available. The Z axis of the table lifts workpieces up to 450 kg. The laser and motion system are conveniently operated via the control console with an intuitive touchscreen. With the AL-TW you can weld without restricting the work area. This enables the processing of large workpieces. We support you with the implementation of the laser safety measures with our laser safety concept.

An inexpensive entry-level model for laser welding that offers a lot of flexibility and expansion options. With this laser system you can flexibly weld small and large components. The laser power can be selected with 150 W or 200 W, ideal for welding all common metals quickly and reliably. Various work tables can be placed in front of the lifting column. Or you can weld directly on the pallet truck or pallet. This is possible because the resonator can be turned to the side or even to the back. The resonator, which sits in a slide rail, can also be pulled far forward. We also optionally supply a fixed table top for the lifting column. Operation is intuitive via a touch display. A few helpful apps e.g. for programmed circular welding or shell surface welding support the user at work. The laser system is also expandable.

Suitable also for welding precision mechanical parts and medical technology components as well as for the manufacture of sensors and electrical components The ALS 100 is an ergonomic workplace The spacious work chamber offers a very brightly lit work area and is loaded via two side doors. The average power of 100 W enables a fast pulse sequence (up to 25 Hz) and thus fast work even at high energy settings. The homogeneous fusion of the materials results in welding results of the highest quality. The laser is used in the manufacture and repair of jewelry, in precision engineering or when welding sensors

Right hand cutting solid reamers with extra long shanks. The front end of these reamers is ground to act as pilot. The cutting edges are precision ground with a gradually increasing relief angle to eliminate chattering and to permit easy and smooth chip formation. The reamers are provided with a hard chromium coating. The very hard chromium coating reduces friction, giving improved chip flow and reducing the tendency for built-up edges.

Das GEFASOFT Laserprozessmodul wird in einer automatisierten Umgebung eingesetzt und kann je nach Variante folgende Prozesse abbilden: Variante 1: Laserkunststoffschweißen Variante 2: Lasermarkieren und / oder Laserreinigen Integrationsmodul mit Laser-Strahlquelle und produktspezischer Auslegung. Laserschutz wird durch das Werkzeugdesign gewährleistet (Laserklasse I). Kann auf verschiedenste Werkstückträger Transportsysteme adaptiert werden Wie profitieren Sie? Wir unterstützen Sie bei Designberatung ihrer Bauteile über Vorversuche und Testreihen bis hin zur Validierung des Prozesses und Integration in ein MES-System. Zusätzlich übernimmt GEFASOFT die perfekte Auslegung des Lasersystems.

Der Plasmabrenner wird zum Schneiden von Stahlblech/Aluminium/Edelstahl mittels der Plasmatechnologie verwendet. Hierfür können wir Ihnen die benötigten Verschleißteile liefern. Der Plasmabrenner SAF® (FRO®) CPM-400 von Oerlikon® wird zum Schneiden von Stahlblech/Aluminium/Edelstahl verwendet und ist für Leistungen bis 260 Ampere geeignet. Zu diesem Plasmabrenner können wir Ihnen eine große Anzahl der verschiedenen Verschleißteile und auch den kompletten Plasmaschneidkopf liefern.

SPIROL’s Series 2000 Vibratory Feed Systems provide higher feed rates, gentler feeding, and the ability to accommodate a wider range of part configurations and materials than conventional feed systems. The advanced state-of-the-art electronic controller combines modern technology and unique features to deliver superior performance by continuously and automatically adjusting the drive system to the natural frequency of the bowl. This variable frequency technology compensates for changes in the bowl mass to ensure consistent feed rates and eliminates bowl tuning, allowing interchangeable bowls with a single drive. Additional benefits include increased energy efficiency, clockwise/ counterclockwise capability, reverse rotation, and significantly lower noise levels. The controller utilises a touch screen interface with the capacity to store 50 recipes. This system is ideal for fragile, tactile, and slippery parts. Visit www.SPIROL.com to learn more!

Die Leistritz Wirbelmaschine LWN 90 S ist mit der Außenwirbeleinheit AWS 90-S für die Bearbeitung von Kugelgewindetrieben mit ca. 3 - 28 mm Außen-durchmesser und bis zu 300 mm Spindellänge. Dieser Maschinentyp ist das Ergebnis langjähriger Erfahrung auf dem Gebiet des Gewindewirbelns. Er wurde nach den neuesten technischen Erkenntnissen konzipiert. Darüber hinaus wurde höchstes Augenmerk auf produktionsorientierte und ergonomische Eigenschaften gelegt, was zu einer höheren Produktivität und Präzision führt.

The desktop laser welding machine delivers with 50 watts good beam power and is characterized by its uniform, powerful, yet soft welding behaviour. The manual welding laser VL 50 has a very spacious working chamber and allows to weld precious metals such as silver and gold due to its powerful laser behaviour. Longer concentrated work is easily possible thanks to the ergonomically designed housing with the well thought-out arrangement of keyboard, display and joystick. The desktop laser VL 50 is a valued tool in the manufacture and repair of dentures and jewelry, in welding on precision parts, medical technology components and sensors, but also when applying materials to small molds.